400HD Series IP Phones for Teams
Version 2.3.410 68 Document #: LTRT-08641
6. The user then connects the USB cable from the phone to the PC.
Note:
• It is important to set the feature up in this order (first enable USB mode and then
connect the USB cable).
• If the user connects the cable before enabling the mode, they’ll get this message:
7. On a PC running Windows OS, the user must navigate to Settings > Devices >
Audio and make sure the phone is set to be the PC’s default audio device.
8. Media such as YouTube and Windows Media Player can be played via the phone
speaker.
[Applies to Native Teams devices that support Wi-Fi] Network administrators can
manually configure Wi-Fi settings via the Configuration File as an alternative
method to configuring them via the phone’s user interface. The Wi-Fi settings
application on the device and the Configuration Database are synchronized. See the
phone’s User’s and Administrator’s Manual for more information.
In previous versions, if network VLAN mode ‘network/lan/vlan/mode’ was set to LLDP,
the phone retrieved the VLAN and LLDP switch (for location purposes) from LLDP.
Now, LLDP switch information (for location purposes) is retrieved when parameter
network/lan/lldp/enabled=1 even when VLAN is retrieved from CDP or VLAN is
disabled or VLAN is manual.
Microsoft Teams application’s ‘Report an issue’ option can be triggered by
simultaneously pressing the Vol up + Vol down keys. This can help to report an issue
even if the application is stuck and does not allow the user to report the issue via the
Application > Settings tab.
AudioCodes’ Android Phone Utility management application has been updated to
version 1.1.27, including a name change (it was previously Teams IP Phone Utility).
Updates include:
• A new drop-down allowing network administrators to take screenshots of the
phone’s Expansion Module (sidecar) (C450HD models or C455HD models). By
default, the field indicates ’main’, i.e., the phone’s main screen.
To Next Page
Loading...
