Installation Manual 38 Document #: LTRT-70113
Mediant 2000
3.6.2 Loading ini and Auxiliary Files
The auxiliary files (and ini file) are dat files that can be loaded to the device to provide
enhanced device provisioning. For detailed information on these files, refer to the device's
User's Manual.
Notes:
• The current settings of parameters that are not included in the ini file are
retained (incremental).
• After loading the ini file, the device does not reset. Some files (e.g., Call
Progress Tones) are not changeable on-the-fly and require a device
reset.
• Saving an auxiliary file to flash memory may disrupt traffic on the device.
To avoid this, disable all traffic on the device, by performing a graceful
lock (refer to 'Saving and Resetting the Device' on page 31).
• You can also use BootP to load the auxiliary files to the device (refer to
the Product Reference Manual).
¾ To load an auxiliary file to the device:
1. Open the 'Load Auxiliary Files' page (Management tab > Software Update menu >
Load Auxiliary Files).
Figure 3-11: Load Auxiliary Files Page
To Next Page
Loading...
Need help?
General
