Version 7.0 11 Mediant 3000
Hardware Installation Manual 2. Unpacking the Device
2 Unpacking the Device
Follow the procedure below for unpacking the received carton in which the device is
shipped.
To unpack the device:
1. Open the carton and remove the packing materials.
2. Remove the device from the carton.
3. Ensure that the package contains the following items:
• One or two DC power cables.
• RS-232 adapter cable (two meters in length).
• Regulatory Information list.
4. Check that there is no equipment damage.
5. Check, retain and process any documents.
If any items are missing or damaged, please notify your AudioCodes sales representative.
To Next Page
Loading...
