Notes and Warnings
Warning: Read and adhere to all warning statements in this document before installing
the device.
Warning: The device is an INDOOR unit and therefore, must be installed only indoors.
In addition, FXS and Ethernet port interface cabling must be routed only indoors and
must not exit the building.
Note: Open source software may have been added and/or amended for this product.
For further information, please visit our website at
https://www.audiocodes.com/services-support/open-source/
AudioCodes sales representative.
Caution Electrical Shock
Do not open or disassemble this device. The device carries high voltage and contact
with internal components may expose you to electrical shock and bodily harm.
Warning: The device must be installed and serviced only by qualified service personnel.
Warning: The device must be installed ONLY in restricted access locations that are
compliant with ETS 300 253 guidelines where equipotential bonding has been
implemented.
Warning: Disconnect the device from the mains and Telephone Network Voltage (TNV)
before servicing.
Document Revision Record
LTRT Description
10259 FXO warning statement.
10260 Power amperage updated.
10261 E1 cabling warning statement regarding STP.
10262 Max. power consumption.
10263 Power surge warnings; AC input current.
10265 Miscellaneous formatting.
10266 E1/T1 PSTN fallback added.
To Next Page
Loading...
Need help?
General
