AudioCodes Mediant Series - 4.3.2 Step 3 b: Configure the PRI PSTN Interface

Configuration Note 4. Configure AudioCodes Mediant Gateway
Version 6.8 27 February 2014
4.6 Configure Codecs
The procedure below describes how to configure codecs.
 To configure codecs:
1. Open the Coders page (Configuration tab > VoIP menu > Coders and Profiles >
Coders).
2. From the 'Coder Name' drop-down list, select audio codecs supported by Office 365
Exchange Online UM.
Figure 7: Codec Configuration
3. Click Submit.