Configuration Note 4. Configure AudioCodes Mediant Gateway
Version 6.8 37 February 2014
4.13.2 Generate Certificate Signing Request (CSR)
The procedure below describes how to generate certificate signing requests.
To generate certificate signing requests:
1. Open the Certificates page (Configuration tab > System menu > Certificates).
2. In the 'Subject Name' field, enter the DNS name assigned to your device (see
Section 3.1 on page 13).
3. Enter all other certificate details.
4. Click Create CSR. After a few seconds, a text rendering of the certificate signing
request is displayed:
Figure 4-18: Generating Certificate Signing Requests
5. Copy all the text of the certificate request (including the BEGIN and END sections and
dashes) and provide it to the Certificate Authority (CA) as part of their certificate
generation process (see Section 3 on page 13).
To Next Page
Loading...
