AudioCodes Mediant Series Configuration Note

Microsoft Office 365 Exchange UM with Legacy PBX
AudioCodes Mediant Gateway 34 Document #: LTRT-40512
4.11 Configure VoIP Gateway IP-to-Tel Routing Rules
The procedure below describes how to configure VoIP gateway IP-to-Tel Routing Rules.
 To configure IP-to-Tel routing rules:
1. Open the Inbound IP Routing Table page (Configuration tab> VoIP menu > GW and
IP to IP > Routing > IP to Trunk Group Routing).
2. In the 'Dest Phone Prefix' field, enter an asterisk.
3. In the 'Source Phone Prefix' and Source IP Address' fields, enter an asterisk symbol
(*) to indicate any.
4. In the 'Trunk Group ID' field, enter "1".
Figure 4-14: IP-to-Tel Routing Rules Configuration
5. Click Submit.

AudioCodes Mediant Series Specifications

General

Model	Mediant Series
Category	Gateway
VoIP Protocols	SIP, H.323, MGCP
Interfaces	E1/T1, BRI
Network Interfaces	10/100/1000 Ethernet
Security	TLS
Management	Web, CLI, SNMP
Codecs	G.711, G.723, G.726, G.729, iLBC, Opus
Operating Temperature	0°C to 40°C
Storage Temperature	70°C
Ports	Varies by model (FXS, FXO, BRI, E1/T1, Ethernet)