User's & Administrator's Manual 2. Setting up the RXV81
Version 1.18 19 RXV81 MTR on Android Video Collaboration Bar
2 Setting up the RXV81
Note: See the RXV81 MTR on Android Video Collaboration Bar Deployment Guide shipped with the
product or available from AudioCodes for information about the hardware of the RXV81, including:
• Package contents
• Mounting
• Cabling
2.1 Getting Started
After mounting and cabling the RXV81 device as shown in the Deployment Guide, pair the
supplied remote control with the RXV81. The instructions here show how to pair.
To pair the RC with the RXV81:
1. After cabling, remove the RC from its packaging and insert the batteries supplied into it.
2. View in the display the message:
Remote is not connected. Hold below buttons while holding the remote near the box.