Audison Thesis TH quattro - Amplifier Setting: Identification

62
Digital domain
ADVANCED MANUAL / ACNet
2
3
4
7
6
10
98
5
1
Amplifier Setting: Identification
The amplifier identification provides its S/N - serial number (fixed), the owner name (free-text), the installer
name (free-text) and the Firmware release included in the microprocessor inside the TH amplifier.
The ACNet area shows the amplifier configuration (mechanically set in the TH Input Panel) and allows the Amp
ID and AmpPreout setting through a drop-down menu.
The report boxes on the right confirm if any crossover modules have been used inside the amplifier and which
slope setting has been given.
The drop-down menu displays the available values to be assigned to the amplifier depending on its
configuration / functioning modes.
For example, if the amplifier it’s mono set, the available ID will be the specific ones for the mono setting.
If the system is also composed by non-TH amplifiers, they can be managed by attributing an ID to the Pre Out
connected to them. The menu default option is “TH AMP”, because generally a TH amp (provided with its
specific Amp ID already) is connected to the Pre Out.
ACNet - Audison Control Network
130.com.ua
Autogood products internet store http://130.com.ua