AUMA SA 35.1 - Page 3

216. Operation................................................................................................................................
216.1. Manual operation
216.1.1 Manual operation: engage
216.1.2 Manual operation: disengage
226.2. Motor operation
237. Indications..............................................................................................................................
237.1. Mechanical position indicator/running indication
248. Signals.....................................................................................................................................
248.1. Feedback signals from actuator
259. Commissioning......................................................................................................................
259.1. Switch compartment: open
259.2. Torque switching: set
269.3. Limit switching: set
269.3.1 End position CLOSED (black section): set
279.3.2 End position OPEN (white section): set
279.4. Intermediate positions: set
289.4.1 Running direction CLOSE (black section): set
289.4.2 Running direction OPEN (white section): set
289.5. Test run
289.5.1 Direction of rotation: check
299.5.2 Limit switching: check
309.6. Potentiometer setting
309.7. Electronic position transmitter RWG: set
319.8. Mechanical position indicator: set
329.9. Switch compartment: close
3310. Corrective action....................................................................................................................
3310.1. Faults during commissioning
3310.2. Motor protection (thermal monitoring)
3411. Servicing and maintenance...................................................................................................
3411.1. Preventive measures for servicing and safe operation
3411.2. Maintenance
3511.3. Disposal and recycling
3612. Technical data.........................................................................................................................
3612.1. Features and functions of actuator
3812.2. Service conditions
3812.3. Further information
3913. Spare parts.............................................................................................................................
3913.1. Multi-turn actuators SA 25.1 – SA 48.1/SAR 25.1 – SAR 30.1
4114. Certificates..............................................................................................................................
4114.1. Declaration of Incorporation and EC Declaration of Conformity
4415. Index........................................................................................................................................
46Addresses...............................................................................................................................
3
SA 25.1 – SA 48.1/SAR 25.1 – SAR 30.1
Table of contents