AUMA SA 35.1 - Default Chapter; Table of Contents

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Preserve operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Table of contents Page
41. Safety instructions.................................................................................................................
41.1. Basic information on safety
41.2. Range of application
51.3. Applications in Ex zone 22 (option)
51.4. Warnings and notes
61.5. References and symbols
72. Identification...........................................................................................................................
72.1. Name plate
72.2. Short description
83. Transport, storage and packaging........................................................................................
83.1. Transport
83.2. Storage
83.3. Packaging
94. Assembly................................................................................................................................
94.1. Mounting position
94.2. Handwheel fitting
104.3. Multi-turn actuator: mount to valve/gearbox
104.3.1 Output drive types B, B1 – B4 and E
104.3.1.1 Multi-turn actuator (with output drive types B1 – B4 or E): mount to valve/gearbox
114.3.2 Output drive type A
114.3.2.1 Stem nut: finish machining
124.3.2.2 Multi-turn actuator (with output drive type A): mount to valve
134.4. Accessories for assembly
134.4.1 Stem protection tube for rising valve stem
145. Electrical connection.............................................................................................................
145.1. Basic information
155.2. Motor connection
165.3. Connection with AUMA plug/socket connector
175.3.1 Terminal compartment: open
175.3.2 Cable connection
195.3.3 Terminal compartment: close
195.4. Accessories for electrical connection
195.4.1 Parking frame
205.4.2 Protection cover
205.4.3 Double sealed intermediate frame
205.4.4 Earth connection, external
2
SA 25.1 – SA 48.1/SAR 25.1 – SAR 30.1
Table of contents