AUMA SAEx 07.2 - Page 101

L
Language in the display 46
LED end position signalling 68
LEDs (indication lights) 53
Lifetime 86
Limit switching 59, 63
Local actuator operation 41
Local control 41
Local controls 41
Local setting 42
Lubrication 82
M
Main menu 43
Mains frequency 11, 11
Mains voltage 11, 11, 26
Maintenance 6, 80, 82
Maintenance required - indic-
ation on display
52
Manual operation 40
Marking for explosion protec-
tion
12
Mechanical position indicator 54, 70
Menu navigation 42
Motor heater 85
Motor operation 41
Motor protection 11, 84, 84
Motor type 11
Mounting position 92
N
Name plate 10
Non-Intrusive 8
Not ready REMOTE - indica-
tion on display
51
O
Operating the actuator from
local controls
41
Operation 5, 40
Operation commands - indic-
ations on display
50
Order number 10, 11, 13
Out of specification - indica-
tion on display
52
Output contacts 55
Output drive type A 18
Output drive types 18
Output drive types B 22
Output signals 55
Output signals Potential 27
Overload protection 40
P
Parking frame 39
Password 44
Password change 45
Password entry 45
Pollution degree 92
Positioner - indication on dis-
play
50
Position indicator 54, 70
Position transmitter 13
Position transmitter (EWG) 66
Position transmitter (RWG) 69
Potentiometer 68
Power class 11
Power class for switchgear 13
Power factor 11
Production, year 13
Protection on site 26
Protective measures 5
Push-to-run operation 42
Q
Qualification of staff 5
R
Range of application 6
Rated current 11
Rated power 11
Recycling 83
reductions 27
Reference operation 64
Remote actuator operation 42
Residual current device
(RCD)
27
Running indication 54
RWG 69
101
SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit - electromechanical
ACExC 01.2 Intrusive Profinet Index