AUMA SAR 6 - Electrical Connection; Terminals; Plug socket connector; Electrical Connection for Integral Starter Versions

Interface
Electrical Connection
Electrical Connection for Integral Starter Versions
Terminals
Plug socket connector
Version I :
32 x 2 = 64 pins for control
3 + 1 = 4 pins for power
Version II :
50 pin circular connector for control
6 + 1 = 7 pins for power
Screw type terminals are used for electrical
connection as standard. Stud type terminals can
be provided for power connections. Terminals
are DIN rail mountable and are available as
single or double decker versions also.
The actuators can also be equipped with plug
socket connectors in two versions.
trouble shooting at site.
64 pin connector with 3+1 pins for power
connection or 50 pin circular connector with
6+1 pins for power connection. This simplifies
Between actuator and compact or e-pac :
From compact or e-pac to customer connections:
Screw type terminals or 64 pin connector with
3+1 pins for power connection or 50 pin circular
connector with 6+1 pins for power connection.
Circular Connector
Multi-pin Connector
Screw type terminals
Technical Data
Screw type terminals
Terminals max.
Voltage max.
Voltage max.
Voltage max.
Current max.
Current max.
Type of connections
for customer use
Type of connections
for customer use
No. of contacts
No. of contacts
Cross sec. max.
Current max.
Type of Connection
Cross section max.
Cross sec. max.
Plug socket connector 32 x 2 & 3 + 1
Plug socket connector, circular
Power
3
6
(3 used)
3
750 V
750 V
1
-
-
750 V
25 A
25 A
-
-
-
34 A -
Scr or stud
Screws
Screws
Screws
Screws
Screws
Screws
4 sq mm
6 sq mm
6 sq mm
4 sq mm
6 sq mm
6 sq mm
2.5 sq mm
2.5 sq mm
2.5 sq mm
Scr or
stud
Scr
25 A
500 V
16 A
16 A
500 V
250 V
64
Earth
1
1
Controls
64
50
25