Mounting Position Functional Tests
Test Certificates
General
Auma actuators also with integral controls can
be operated without restriction in any mounting
position.
After assembly, all actuators are thoroughly
tested and torque switches are calibrated. Final
inspection record is provided to the customer.
Endurance Test as per GDCD Standard
Damp Heat Cycle Test as per IS 9000
Vibration Test as per IS 12075
Noise Test as per IS 12065
Enclosure Protection Test as per IS 13947
Tests on Micro Switches
Motor Performance Tests
Auma actuators and critical components of
actuators have been tested & guaranteed for
performance. Some of the Type test certificates
available are listed.
29
To Next Page
Loading...
