AUMA SAV 07.2 - Page 4

6010. Commissioning (settings/options in the actuator).............................................................
6010.1. Switch compartment: open/close
6110.2. Mechanical position indicator (self-adjusting)
6110.2.1. Mechanical position indicator: set
6210.2.2. Gear stage of the reduction gearing: test/set
6310.3. Mechanical position indication via indicator mark (not self-adjusting)
6310.3.1. Mechanical position indicator: set
6310.3.2. Gear stage of the reduction gearing: test/set
6611. Corrective action....................................................................................................................
6611.1. Faults during operation/commissioning
6611.2. Fault indications and warning indications
7011.3. Fuses
7011.3.1. Fuses within the actuator controls
7011.3.2. Motor protection (thermal monitoring)
7112. Servicing and maintenance...................................................................................................
7112.1. Preventive measures for servicing and safe operation
7212.2. Maintenance
7212.3. Disposal and recycling
7313. Technical data.........................................................................................................................
7313.1. Technical data Multi-turn actuators
7513.2. Technical data Actuator controls
8114. Spare parts.............................................................................................................................
8114.1. Multi-turn actuators SAV 07.2 – SAV 16.2/SARV 07.2 – SARV 16.2
8314.2. ACV 01.12 Actuator controls – fieldbus
8515. Certificates..............................................................................................................................
8515.1. Declaration of Incorporation and EU Declaration of Conformity
86Index........................................................................................................................................
89Addresses...............................................................................................................................
4
SAV 07.2 – SAV 16.2 / SARV 07.2 – SARV 16.2 Control unit: electronic (MWG)
Table of contents ACV 01.2 Modbus RTU