AUMA SQEx 05.2 - Actuator Controls ACExC KES Spare Parts

112 pages

To Next Page

To Previous Page

15.4. Actuator controls AUMATIC ACExC 01.2 KES

105

SQEx 05.2 – SQEx 14.2/SQREx 05.2 – SQREx 14.2 Control unit: electronic (MWG)

ACExC 01.2 Non-Intrusive Profibus DP Spare parts

Main Page

Table of Contents2
Safety Instructions5
Prerequisites for the Safe Handling of the Product5
Range of Application6
Warnings and Notes7
References and Symbols7
Short Description8
Name Plate10
Transport and Storage14
Transport14
Storage15
Assembly17
Mounting Position17
Handwheel Fitting17
Mount Actuator to Valve17
Overview on Coupling Variants18
Mount Actuator (with Coupling)18
Mounting Positions of Local Controls21
Mounting Positions: Modify21
Electrical Connection22
Basic Information22
Overview of AUMA Electrical Connections24
KT/KM Electrical Connection26
Terminal Compartment: Open27
Cable Connection28
Fieldbus Cables: Connect30
Fieldbus Connection for Line Topology30
Terminal Compartment: Close32
KP/KPH Electrical Connection33
Terminal Compartment: Open34
Cable Connection35
Fieldbus Cables: Connect36
Terminal Compartment: Close37
KES Electrical Connection38
Terminal Compartment: Open39
Cable Connection40
Fieldbus Cables: Connect41
Terminal Compartment: Close42
External Earth Connection42
Accessories for Electrical Connection43
Actuator Controls on Wall Bracket43
Parking Frame44
Operation45
Manual Operation45
Manual Valve Operation45
Motor Operation45
Operating the Actuator from Local Controls45
Actuator Operation from Remote46
Menu Navigation Via Push Buttons (for Settings and Indications)47
Menu Layout and Navigation48
User Level, Password49
Password Entry49
Password Change50
Timeout for Incorrect Password Entry50
Language in the Display51
Language Change51
Indications52
Indications During Commissioning52
Indications in the Display52
Feedback Signals from Actuator and Valve53
Status Indications According to AUMA Classification55
Status Indications According to NAMUR Recommendation56
Indication Lights of Local Controls58
Mechanical Position Indication (Self-Adjusting)58
Mechanical Position Indication Via Indicator Mark (Not Self-Adjusting)59
Signals (Output Signals)60
Signals Via Modbus RTU60
Status Signals Via Output Contacts (Digital Outputs)60
Assignment of Outputs60
Coding the Outputs60
Analogue Signals (Analogue Outputs)61
Commissioning (Basic Settings)62
End Stops in Part-Turn Actuator62
Set End Stop CLOSED63
Set End Stop OPEN63
Type of Seating: Set64
Torque Switching: Set65
Limit Switching: Set67
Fieldbus Address (Slave Address): Set68
Test Run69
Direction of Rotation at Mechanical Position Indicator: Check70
Limit Switching: Check70
Commissioning (Settings in the Actuator)72
Switch Compartment: Open/Close73
Mechanical Position Indicator (Self-Adjusting)73
Mechanical Position Indicator: Set74
Gear Stage of the Reduction Gearing: Test/Set74
Mechanical Position Indication Via Indicator Mark (Not Self-Adjusting)75
Mechanical Position Indicator: Set76
Gear Stage of the Reduction Gearing: Test/Set76
Corrective Action78
Faults During Commissioning78
Fault Indications and Warning Indications78
Fuses82
Fuses Within the Actuator Controls82
Fuse Replacement83
Replace Fuses83
Test/Replace Fuses83
Motor Protection (Thermal Monitoring)84
Servicing and Maintenance85
Preventive Measures for Servicing and Safe Operation85
Disconnection from the Mains85
Disconnection from the Mains with KT/KM Electrical Connection86
Disconnection from the Mains with KP/KPH and KES Electrical Connection87
Maintenance87
Disposal and Recycling88
Technical Data90
Technical Data Part-Turn Actuator90
Technical Data Actuator Controls92
Tightening Torques for Screws98
Spare Parts99
Part-Turn Actuators Sqex99
Sqex 14.2/Sqrex 05.299
Sqrex 14.2 KT/KM99
Actuator Controls Acexc 01.2 KT/KM101
Actuator Controls Acexc 01.2 KP/KPH103
Actuator Controls AUMATIC Acexc 01.2 KES105
Index109

AUMA SQEx 05.2 - Actuator Controls ACExC KES Spare Parts

Table of Contents

Other manuals for AUMA SQEx 05.2

Related product manuals