EasyManua.ls Logo

Aurora PVI-AEC-EVO User Manual

Aurora PVI-AEC-EVO
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
aroruA - 3.0 .veR
BCB.00029.5
®
is a trademark by Power-One - Product is subject to technical improvements
www.power-one.com
QUICK INSTALLATION GUIDE
Aurora
®
Power Service USA 877-261-1374
Aurora
®
Power Service France 00 800 00 28 76 72
Aurora
®
Power Service Germany 0800-2200211
Aurora
®
Power Service Italy 00 800 00 28 76 72
Aurora
®
Power Service Spain 00 800 00 28 76 72
Aurora
®
Power Service Middle East 00 800 00 28 76 72
Aurora
®
Power Service Australia +61 2 9735 3111
Aurora
®
Power Service China +86 755 2988 5888
Aurora
®
Power Service Singapore +65 6896 3363
Aurora
®
Power Service Malaysia +603-8025 9963
Model:
PVI-AEC-EVO
PVI-AEC-EVO-LIGHT

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Aurora PVI-AEC-EVO and is the answer not in the manual?

Aurora PVI-AEC-EVO Specifications

General IconGeneral
CoolingNatural convection
Protection ClassIP65
Number of MPP Trackers1
Output Power3000 W
AC Voltage230 Vac
Frequency50 Hz
Efficiency96.5%
Operating Temperature Range-25°C to +60°C
Peak Efficiency97%

Summary

Product Description

Package Content

User Interface and Use of the Display

Access to the main menu with administrator privileges

Enables administrator access to display menus for initial system configuration and settings.

Pin-Out of System Connectors

Power Supply Connections and System Start Up

Date and Time Settings

Connection of the RS485 line and inverter acquisition check

Configuration of the Analog Inputs

System Configuration for connection to the LAN Network (Ethernet Port)

CHANGE OF PC NETWORK PARAMETERS

Procedure to modify PC network settings for compatible connection with the system.

Internal Webserver access

MAC Address Identification

Alternatively it's possible to obtain the MAC Address from the display

Method to retrieve the device's MAC address via the system's display interface.

Firmware updating procedure via SD Card