Aurora PVI-AEC-EVO - Configuration of the Analog Inputs

The measurement is
betweenthesetwos
The PT100/PT1000
furthersettings.
Regarding the conn
be taken directly fr
o
readingisthesame.
For the sensor con
n
measuredatoneoft
Thegroundingofth
sensorrangeonlyin
After carrying out t
acquired:
1. Enterthemain
2. Accesstheme
n
3. Select the
selectedmode
l
4. Select the
selectedmode
l
“ANA
“ANA
PVI-AEC-E
12.00.00
>ANALOG
I
ANALOG I
>settings
change p
>ANALOG I
PULSE IN
Note: Incas
clam
p
11-EN
After carrying out these checks, start up first the monitoring system and then the inverters.The system automatically
carries out ascan ofthe RS485 bus and automatically detects the available inverters.Thepresenceof theinverters can be
checkeddirectlyfromthedisplay.
1. Enterthemainmenuasadministrator(Seepar.'C’).
2. Accessthe menu(todisplaythe stringinverters)and/or
(to display the 55kW conversion modules). The number of inverters detected duringthe scan will be
displayed;thelistofthemonitoredinvertersidentifiedbytheSerialNumber (S/N)canbedisplayedbyscrollingusing
thearrowkeys( ).
'CURRENTVALUES'> 'ENERGY INVERTERS' 'CURRENTVALUES'>
'ENERGY RACK'
H. Configuration of the Analog Inputs
Theconnectionoftheanaloguesensorsmustbecarriedoutrespectingthepin-outsoftheJ3connector.
Thesystemhastwo0-10VdcinputsandaPT100/1000input.
CHANGE VALUE
NEXT
DIGIT
SET PIN TO 0010
PVI-AEC-EVO ......
12.00.00 01/01/11
>ENERGY INVERTERS
ENERGY RACK
menu pin
0***
30 INVERTERS
>INVERTER SN 123456
>CURRENT VALUE
SETTINGS
ENTER ENTER
ENTER
ENTER
CHANGE
INVERTER
>ENERGY RACK
ENERGY PLANT
RACK N. 1
>RACK SN 123456
ENTER
CHANGE
RACK
Note: The time necessary for the PVI-AEC-EVO to scan and acquire the inverters depends on the number of
inverterspresentonthesameline(sometimesseveralminutes).
Note: Toeachanalogue input(both 0-10Vdc andPT100/1000 types)it ispossible toconnect onlyoneanalog
sensor. Itisthereforenotpossibletoconnectmultiplesensorsonthesameanaloginput.
Withrespectto the connection of the PT100/1000 sensors,the system is ableto carry out the sensorreading throughthe
connectionofthree-wires:
l
l
l
Asensorpowersupplyline(PT_ALIM);
Areadingline(PT_SENSE);
Apowersupplyandreadingclosingline(PT_RTN).
PVI-AEC-EVO / PVI-AEC-EVO LIGHT
QUICK INSTALLATION GUIDE