EasyManua.ls Logo

Aurora PVI-AEC-EVO - Firmware updating procedure via SD Card

Aurora PVI-AEC-EVO
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
O. Firmware updating procedure via SD Card
It is possible to upgrade the firmware of the PVI-AEC-EVO either locally using the SD Card, or remotely using the web
portalAuroraVision.
1. Accessthedisplaybyenteringtheuserpassword0000.
2. Checkandnotethecurrentfirmwareversionsinstalled:
Firmware AVR: Information > Product > FirmwareAVR
Firmware Display:
Firmware IO:
3. TurnoffthePVI-AEC-EVOandwaitatleastoneminute.
4. DisconnectallavailableconnectionsfromthePVI-AEC-EVO(RS458line(s),LANconnection,sensors).
5. RemovetheSDCardfromtheslotonthePVI-AEC-EVOfrontpanelbypressingtheSDCardgently.
6. InserttheSDCardintotheSDCardreaderorintototheSDCardreaderslotofthePC.
7. Deletethefoldersupgrade,web,langandconfigfromtheSDCard.
8. Copythenewfoldersupgrade,web,langandconfigintotherootoftheSDCard.
9. RemovetheSDCardfromtheSDCardreaderorfromtheSDCardreaderslot.
10. InserttheSDCardintotheslotonthePVI-AEC-EVOfrontpanelbypressingtheSDCardgentlytolockitintoplace.
11. Turn on the PVI-AEC-EVO and wait about one minute.(N.B.: Power failureduring updatemay cause serious damage
tothedevice).
12. EnterthedisplaybypushingtheENTERbuttonandinsertthepassword“0010”;pushENTERtoconfirm.
13. Followthe path: pressENTER toconfirm;wait thecompleting of
upgrade(fewminutes).Aftertheupgrade thesystemwillreboot:waitthe completereboot(date/timewillbeshown
onthedisplay).
14. EnterthedisplaybypushingtheENTERbuttonandinsertthepassword“0010”;pushENTERtoconfirm.
Information > Product > FirmwareDisplay
Information > Product > FirmwareIO
“SETTINGS> UPGRADE FIRMWARE > UPGRADE AVR”
15. Followthe path press ENTER toconfirm;wait the completing of
upgrade (few minutes). The upgrading process will be completed when the message will be
displayed.
“SETTINGS > UPGRADE FIRMWARE > UPGRADE ADC
“Upgrade Success
21-EN
PVI-AEC-EVO / PVI-AEC-EVO LIGHT
QUICK INSTALLATION GUIDE
16. Followthepath
of upgrade (few
displayed.
17. Follow the pa
t
minutes).The u
PressESCtoexit
18. Switchoffthesy
Note: The firmware update via SD card should be carried out
.
only if it is not possible to update the firmware
viatheAuroraVisionwebportal
Note: Fordetails on theprocedurefor thefirmware updatingthrough theweb portalAuroraVision,refer
tothedocumentationonthewebsite .www.Auroravision.net

Table of Contents