Austroflamm Clou Pellet - Important Information for Future Starts

Clou Pellet / Clou Compact Pellet User instruction 11 English
STARTING UP YOUR STOVE
To start the pellet stove, turn the dialing knob clockwise from
the starting position as far as it will go. The fully automatic start-
up process begins immediately afterwards. This takes about 10
minutes. After that, the stove will burn at the selected heat
output.
Important information for future starts
Every Austroflamm pellet stove is equipped with high-quality Keramott in the firebox. In addition to
being extremely durable, the Keramott always whitens and remains white when the temperature in the
firebox is sufficiently high. To achieve the necessary high temperatures in the firebox for the Keramott
to burn cleanly, you must operate the pellet stove - e.g.: after the automatic start, when the Keramott is
heavily sooted and black - for approx. 1 hour at the heating power setting (5 /AUTO).
Depending on the quality of the pellets used and the heating power setting, the glass of the firebox
door will become soiled during operation. The dirt that accumulates on the glass can simply be wiped
away with soft paper when the stove has cooled down. We also recommend cleaning with Austro-
flamm glass cleaner from time to time.
IMPORTANT:
The firebox, the burn pot and the glass of the firebox door must always be cleaned after burning the
contents of the pellet hopper.