Clou Pellet / Clou Compact Pellet User instruction 12 English
4 Operating the stove using the dialing knob
Possible operational states of your stove
Starting up your pellet stove
To start your stove using the dialing knob:
Turn the dialing knob clockwise from the starting position
as far as it will go. (= 9 o'clock position)
Your stove starts: The flame in the top right-hand corner
begins to flash green, the display panel then lights up
completely white. This means that your stove is now in the
automatic start phase. This is a fully automatic process.
The pellets are ignited and the firebox is brought to oper-
ating temperature. The automatic start takes approxi-
mately 10 minutes.
The stove indicates the completion of the start phase by means of a permanently lit green flame. Your
pellet stove is now ready for your desired power setting.
You can also start your pellet stove with the optional WLAN-BOX (smartphone and Austroflamm
PelletControl app). To do this, however, you must first position the dialing knob at least in the 3 o'clock
position.
! NOTE: We recommend that you heat the stove for at least 1 hour at setting 5 after the start-up
phase. The lining in the firebox - the Keramott - needs around 400 °C in the firebox to burn off
soot and deposits. At this temperature, the Keramott remains white.
To Next Page
Loading...
