Clou Pellet / Clou Compact Pellet User instruction 15 English
Thermostat - SmartSpot and external thermostat
4.5.1 SmartSpot – advantages, Austroflamm product with modulation
The SmartSpot, available as an option, is a wireless room thermostat developed by Austroflamm. Your stove
model can work with this SmartSpot in combination with a RECEIVER. The SmartSpot is a room thermostat. It
can be positioned at a distance of 10 m from your stove. It measures the room temperature at the place of
installation and regulates the stove output according to the ROOM SETPOINT TEMPERATURE. Unlike exter-
nal thermostats, the SmartSpot works with the MODULATION and ECO MODE functions. This is a considera-
ble advantage when operating the stove. We therefore recommend this product for controlling the heat out-
put.
The SmartSpot is available in neutral white and in a high-quality wood /aluminium finish.
It is important that the SmartSpot is installed by an authorised Austroflamm technician.
4.5.2 External thermostat
The stove can also be controlled by an external thermostat if desired.
The external thermostat is connected to the main control unit at input "I03" & "GND".
The 2-pole plug required for this purpose is available from your Austroflamm dealer as an option under Art.
No. 728 151.
The external thermostat must be connected by an authorised Austroflamm service engineer. Only potential-
free thermostats may be connected.
IMPORTANT: After installing the EXTERNAL THERMOSTAT, set the desired temperature and start the stove
manually to activate the "EXTERNAL THERMOSTAT" FUNCTION.
The external thermostat starts / stops your pellet stove 10 seconds after the desired room setpoint
temperature has been reached, or the temperature has fallen below this value.
To Next Page
Loading...
