21 | Start up log EN Operating manual Ruby
70
21 Start up log
Operator / Customer Dealer / Engineer
Name Company
Street Street
Town and postal code Town and postal code
Telephone Telephone
Email Email
Pellet stove
Model Control software version
Serial number Control panel software version
Technical defects WLAN Box software version
Visual defects WLAN module [ ] yes [ ] no
Accessories / defects (SmartSpot, air distribution module, etc.)
On-site conditions
Socket earthed (see electric installation test certificate) Number of elbows:
Total length of flue pipes:
Type of chimney: [ ] brick [ ] stainless steel [ ] firebrick Flue pipes in plug-in system
[ ] with seal lip [ ] without seal lip
Chimney diameter: ______chimney flue height: ______ Sea level:
Chimney flue – Approved by chimney sweep: [ ] yes [ ]
no
Chimney flue-/draught:
Actual value:_________ Target value: 3-12Pa
Controlled living space ventilation [ ] yes [ ] no Flue pipe diameter:
Other: Outside temperature for draft measurement:
Appliance – Preparation for Start, Functional Check
Pellet hopper loaded Induced draught fan function tested
Pellet quality: e.g. OE standard, DIN plus,
ENplus A1
Screw motor function tested
Riddle grate function tested Ignition cartridge function checked
Keramott “burnt white”
after trial
Partial load test carried out
Firebox door seal checked [ ] yes [ ] no
Instructions for Operator / Customer
Instructions for handling the appliance explained
clearly and comprehensibly
Cleaning and maintenance interval explained
Terms of the guarantee and warranty explained Photographic documentation of actual condition –
hybrid stove installation (Please be sure to obtain
the customer’s consent beforehand)
[ ] wire brush [ ] glove
[ ] user instructions
(Start, combustion and burnout phases carried
out.)
The end customer confirms that they can now put the stove into operation unassisted. They further
confirms that the stove is in a fully functional state and free of defects.
_____________________ ______________________ ____________________
Place, date Signature Operator / Customer Signature Technician