55 | P a g e
Create Families
1. Create a Family by navigating to the Inventory > Categorization > Family tab then
click the Insert Family button
2. In the Family Look-up box, enter a Family name and description
3. Right click in the (Image1) box and select Insert Picture
4. Locate the picture you want to use for the family, then click Ok
5. Click Ok to save the entry
6. Continue steps 1-6 until all families have been created
Examples of Families in the Safety Category could include: Earplugs and Ear Muffs,
Glasses and Goggles, Gloves, etc.
To Next Page
Loading...
