67 | P a g e
Appendix
Care and Maintenance
Your Lockers have been designed to give you years of reliable service with a minimum
amount of maintenance. However, some minor preventative maintenance is required to
keep the system running in peak condition. Below we have listed the tasks that should be
performed at periodic points to ensure the system performs at peak operating efficiency.
Cleaning Exterior Surfaces
1. Sheet Metal Surface – As dirt and grease accumulate on the surface, the machine
should be wiped with a lint free rag and Simple Green or Formula 2001.
2. Windows – The Acrylic viewing windows should be cleaned with Windex or a
different type of window cleaner. DO NOT USE any other product on the
windows as it may scratch or stain the window surface.
3. Keyboard – Clean the keyboard with a keyboard cleaner, AutoCrib suggests that
the cleaner be applied to a rag before wiping the keyboard. DO NOT place any
liquid into the keyboard, this may damage the internal workings of the keyboard.
4. Touch Screen – Wipe the screen with a clean soft rag, 409 or glass cleaner may be
used on the rag. NEVER SPRAY DIRECTLY ON THE TOUCH SCREEN
MEMBRANE.
Hardware – After 30 Days
1. Bin Doors – Open every bin door and make sure the hinges and actuation systems
are not binding up. If they are not working properly make the necessary
adjustments to ensure free operation.
Hardware – After 1 year and every year thereafter
1. Keep bin doors free of build-up
2. Clean the touch screen – DO NOT SPRAY DIRECTLY ON SCREEN!!!
3. Clean the keyboard
To Next Page
Loading...
