In addition to complying strictly with the instructions given in this manual, operators
shall not use the lift and shall report directly to their managers, or if they do not have
one, directly to the manufacturer AUTOLIFT srl, concerning any shortcomings or
potentially hazardous situation which may occur.
This manual aims to provide users and operators with all the information they require to ensure that they
are able both to use the lift appropriately and are able to manage it as autonomously and safely as
possible.
Before performing any operations on the lift, users and operators must carefully read the instructions
given in this publication.
In the event of doubt over the correct interpretation of the instructions, contact the AUTOLIFT srl
technical department to obtain the required clarifications.
This manual is an integral part of the lift, it must be kept safely by the purchaser and made available for
use by the operators.
The contents of this manual comply with the Directive 2007/47/EC and were drafted following the
guidelines given in UNI 10893:2000. They also comply with the requirements of UNI EN ISO
10535:2007.
This manual has 33 pages, including the cover, and enclosures (see para.1.6).
Data and drawings are indicative only; with a view to the continuous development and updating of its
products, the manufacturer may modify the contents without notice.
It is prohibited to disclose, edit or use this manual for any other purposes.
In drafting the manual, we have chosen to use only a few yet clear pictograms to draw the reader's
attention to important concepts and to make consultation simpler and more immediate.
To Next Page
Loading...
