ATS Series Instruction Manual2
Table of Contents
1. Installation Safety Warnings! 3
2. Before you Begin 4
3. Tools Required 4
4. Kit Contents 5
5. Position 5
6. Fit the Opener 6
7. Bracket Position 6
Wall Bracket Position: 6
Mounting The Wall Bracket: 6
Attach The Rail To The Wall Bracket 6
8. Perforated Angle 7
9. Mounting Brackets and Arms 7
Mounting The Door Bracket: 7
Attaching the Arms 7
10. Optional Safety Beam Kit 8
11. Setting Limits 9
Set the Limit Positions and adjust drive speed: 9
Clearing the Door Limit Positions 9
Re-profiling the Door 9
12. Safety Testing 10
Test the Close Cycle 10
Testing the Open Cycle 10
Test the Manual Door Operation 10
13. Auto-Close 10
14. Coding a Transmitter 11
Storing the Transmitter Code 11
Installation of the Wall Mounted Transmitter 11
Remotely Coding Transmitters 11
Erasing All Transmitter Codes 11
Vacation Mode 11
15. Home Owner Safety Warnings! 12
16. Opener Safety & Security 13
Your Door CAN NOT be used when: 13
Your Door CAN be used when: 13
To Disengage the Opener: 13
To Re-Engage the Opener: 13
17. Operating your Opener 13
18. User Operating Controls 14
19. Specifications 15
20. Troubleshooting 16
21. Maintenance 18
22. Battery Replacement 19
23. Battery Disposal 19
24. Appendix 20
A - Status Indication during Operating Mode. 20
B - Adjustment Mode Instructions 21
C - Adjusting Force Margins 21
D - Battery Functions 21
E - Setting limits via Transmitter 22
F - Setting the PET Mode position 22
25. Warranty 23
Installation Instructions
Home Owner Instructions
To Next Page
Loading...
