10
GDO-8V2 EasyRoller® II Owner Installation Instructions
Package contents
GDO-8 Easyroller® drive unit 1
PTX-4 SecuraCode® keyring transmitter 1
Alkaline battery A23 12V 1
Weight bar (not included in some models) 1
Pan head screw M4x50mm (not included in some models) 2
Nilock hex nut M4 (not included in some models) 2
Flat washer I.D.
3
/
16
x ½ (not included in some models) 2
Locking bar covers 2
Installation manual 1
Pan head screw M4x50
Securacode PTX-4
Alkaline
battery A23 12V
Locking bar covers
Saddle*
Drive unit
Weight bar
Door drum*
Hex nut Nilock nut M4
Washer
3
/
16
x ½
Reinforcement plate*
Flat washer*
Spring washer*
Nuts
Bracket*
*Not included
To Next Page
Loading...
