Automation Technology C2-2040-GigE - Page 54

52

C2 Series User Manual Rev. 1.9
 In addition when using Single-Ended Encoders of HTL type the jumpers HTLs_A, HTLs_B and
HTLs_Z must be set.
 The isolated digital outputs of C2-I/O Panel can be operated either with TTL level or with
higher voltage (9–24V DC). In the latter case an external voltage supply must be connected
Track A
Track B
Track Z
n.c.
Differential
Single-Ended
HTLs_A
HTLs_B
HTLs_Z