Autonics krn100 series - Input Type and Range

100mm Hybrid Recorder
A-7
A. Recorder
B.•Indicator
C.•Converter
D.•Controller
E.•Thyristor•
•••••unit
F.•Pressure•
••••transmitter
G.•Temp.•
•••••transmitter
H.•Accessories
KRN100
KRN50
Input•type Display
Input•range
℃ ℉
K
Thermocouple
K(CA) TC-K -200.0 to• 1350.0 -328.0 to•2462.0 73.2 to•1623.2
J(IC) TC-J -200.0 to• 800.0 -328.0 to•1472.0 73.2 to•1073.2
E(CR) TC-E -200.0 to• 800.0 -328.0 to•1472.0 73.2 to•1073.2
T(CC) TC-T -200.0 to• 400.0 -328.0 to•752.0 73.2 to•673.2
B(PR) TC-B 100.0 to• 1800.0 212.0 to•3272.0 373.2 to•2073.2
R(PR) TC-R 0.0 to• 1750.0 32.0 to•3182.0 273.2 to•2023.2
S(PR) TC-S 0.0 to• 1750.0 32.0 to•3182.0 273.2 to•2023.2
N(NN) TC-N -200.0 to• 1300.0 -328.0 to•2372.0 73.2 to•2023.2
C(TT)
※
1
TC-C 0.0 to• 2300.0 32.0 to•4172.0 273.2 to•2573.2
G(TT)
※
2
TC-G 0.0 to• 2300.0 32.0 to•4172.0 273.2 to•2573.2
L(IC) TC-L -200.0 to• 900.0 -328.0 to•1652.0 73.2 to•1173.2
L(Russian•type)
※
3
TC-L_R 0 to• 600.0 32.0 to•1112.0 273.2 to•873.2
U(CC) TC-U -200.0 to• 400.0 -328.0 to•752.0 73.2 to•673.2
Platinel•Ⅱ TC-P 0.0 to• 1350.0 32.0 to•2462.0 273.2 to•1623.2
RTD
Cu50Ω CU50 -200.0 to• 200.0 -328.0 to•392.0 73.2 to•473.2
Cu100Ω CU100 -200.0 to• 200.0 -328.0 to•392.0 73.2 to•473.2
JPt100Ω JPT100 -200.0 to• 600.0 -328.0 to•1112.0 73.2 to•873.2
DPt50Ω DPT50 -200.0 to• 600.0 -328.0 to•1112.0 73.2 to•873.2
DPt100Ω DPT100 -200.0 to• 850.0 -328.0 to•1562.0 73.2 to•1123.2
Analog
Voltage
-60.00 - 60.00mV ±60mV Resolution:•10 ㎶
-99999•to•99999
(display•range•depends•on•
the•decimal•point•position)
-200.00 - 200.00mV ±200mV Resolution:•10 ㎶
-2.000 - 2.000V ±2V Resolution:•1mV
1.000 - 5.000V 1-5V Resolution:•1mV
-5.000 - 5.000V ±5V Resolution:•1mV
-1.00 - 10.00V -1V-10V Resolution:•10mV
Current
0.00 - 20.00mA 0-20mA Resolution:•10 ㎂
4.00 - 20.00mA 4-20mA Resolution:•10 ㎂
※
•1.•C(TT):•Same•as•existing•W5(TT)•type•sensor
※
•2.•G(TT):•Same•as•existing•W(TT)•type•sensor
※
•3.•Russian•type•L•type•temperature•sensor•is•divided•from•general•purpose•L•type.
※
When changing input type to voltage (over ±2V) or current, set the jumper pin of KRN-UI2 (universal input card). Its factory
default is temperature sensor input.
Input type and range