Be careful not to rub the product against rough surfaces or
wear the product, especially the sheet metal housing.
Please regularly check the product parts that need to be
tightened and connected. If found loose, please tighten it in
time to ensure the safe operation of the equipment. The
external and internal parts of the equipment in contact with
various chemical media should be frequently treated with
anti-corrosion treatment such as rust removal and painting to
improve the corrosion resistance of the equipment and
extend its service life.
Comply with the safe operating procedures and do not
overload the equipment. The safety guards of the products
are complete and reliable.
Unsafe factors are to be eliminated in time. The circuit part
should be checked thoroughly and the aging wires should be
replaced in time.
Adjust the clearance of various parts and replace worn
(broken) parts. Avoid contact with corrosive liquids.
When not in use, please store the product in a dry place. Do
not store the product in hot, humid, or non-ventilated places.
Our products are made of long-lasting and durable materials,
and we insist on perfect production process. Each product
leaves the factory after 35 procedures and 12 times of testing
and inspection work, which ensures that each product has
excellent quality and performance.
To maintain the performance and appearance of the product, it is
recommended that the following product care guidelines be read
carefully：
●
●
●
●
●
●
MAINTENANCE SERVICE
Maintenance
20
To Next Page
Loading...
Need help?
General
