Determine at a glance if a circuit is positive, negative, or open
without having to reconnect clips from one battery pole to
another.
Test for continuity with its built-in auxiliary ground lead.
By depressing the power switch, conduct a positive or
negative battery current to the probe tip for testing the function
of an electrical component without the use of jumper wires.
Test for poor ground contacts instantly without performing
voltage drop tests. The tool is also short-circuit protected; its
internal circuit breaker will trip if it becomes overloaded.
Follow and locate short circuits without wasting fuses.
4
The tool is the best electrical tester for reducing diagnostic time in
all 6 to 30 volt vehicle electrical systems. After a simple hook-up
of the tool to the vehicle’s battery, you can:
Specifica-
tions
The tool is powered via the vehicle battery. Connect the RED
battery clamp to the POSITIVE terminal of the vehicle’s battery,
and the BLACK clamp to the NEGATIVE terminal. When the tool
is first connected to a battery (power source), it will sound a beep
and the Head Lights will be on to illuminate the test area of the
probe tip.
Power
General
description
●
●
●
●
●
Display
Operating Temperature
Storage Temperature
External Power
Length
Width
NW
GW
TFT color display (160x128dpi)
0~60°C (32~140°F)
-40~70°C (-40~185°F)
12.0 or 24.0V power provided
via vehicle battery
126mm (4.96”)
46.5mm (1.83”)
Height
35mm (1.38”)
0.105kg (0.23lb)
0.726kg(1.6lb)
To Next Page
Loading...
