Autronica 116-V-100/M User Manual

Mounting Instructions
Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,
AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29,
Autronica Fire and Security
Page 47
9.2 Mounting the Protector Base
9.2.1 Considerations Before Mounting
When the location of the protectors is determined according to
project specifications and regulations, take the following
considerations into account:
 Determine which cable entries that are to be used depending on
the actual cable layout and wiring method (surface-mounted or
concealed conduit wiring)
 It is recommended that the protector base is mounted with the
tagholder and VAD facing towards the nearest door/entrance to
the room
Note that when holes are to be made in the ceiling, take into
consideration that the cable entry of the protector base is not in the
center of the base. (See Template for Marking and Drilling Holes,
chapter 9.2.2).
Location of
Visual Alarm
Device

Autronica 116-V-100/M Specifications

General

Brand	Autronica
Model	116-V-100/M
Category	Security Sensors
Language	English