Mounting Instructions
Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,
AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29,
Autronica Fire and Security
Page 64
9.9 Labeling the Protector Base / Tag Holder
Each protector base is to be tagged with a unique description (tag
name) assigned to the protector’s location.
Place the label with the tag name on the tag holder
9.10 Protector Cover
AutroGuard® protectors are supplied with a protector cover/dust
cap.
To avoid possible contamination of the smoke detection chamber in
dirty environments during the installation and construction phase,
the protector covers must remain in place on the protector until
commissioning is started.
The protector cover must be removed before use; as soon as
construction work is completed, or before the fire detection loop
is in operation.
To Next Page
Loading...
Need help?
General
