Autronica BS-320 User Manual

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 109
5b
To enter READ FILTERS, press 2.
SERVICE
14:23
LOG>LOG SETUP>READ FILTER
Unit Type:
Point
Detection Zone
Fire Alarm Device
Fire Alarm Routing Equipment
SERVICE
14:23
LOG>LOG SETUP>READ FILTER
Unit Type:
Point
Detection Zone
Fire Alarm Device
Fire Alarm Routing Equipment
6b
Use the keyboard to enter text into the input box
-
OR ,- as shown in this example:
To select a Unit Type, press
then scroll downwards by pressing
9
YZ
or move up again by pressing
6
PQR
SERVICE
14:23
LOG>LOG SETUP>READ FILTER
Unit Type:
Point
Detection Zone Zone
Fire Alarm Device
Fire Alarm Routing Equipment
SERVICE
14:23
LOG>LOG SETUP>READ FILTER
Unit Type:
Point
Detection Zone Zone
Fire Alarm Device
Fire Alarm Routing Equipment
Detection Zone is chosen in this example.
7b
To accept the Unit Type, press
SERVICE
14:23
LOG>LOG SETUP>READ FILTER
Unit Type:
Detection Zone:
Unit Name:
CANTEEN
OFFICES
KITCHEN
SERVICE
14:23
LOG>LOG SETUP>READ FILTER
Unit Type:
Detection Zone:
Unit Name:
CANTEEN
OFFICES
KITCHEN
Canteen is chosen in this example.
8b
Continue selecting Unit Name and the Unit State
for the chosen Unit Type, by repeating the
similar procedure.
SERVICE
14:23
LOG>LOG SETUP>READ FILTER
Unit Type:
Detection Zone
Unit Name:
Canteen
Unit State:
Normal
Set filter
SERVICE
14:23
LOG>LOG SETUP>READ FILTER
Unit Type:
Detection Zone
Unit Name:
Canteen
Unit State:
Normal
Set filter
www.ukpanels.com

Autronica BS-320 Specifications

General

Brand	Autronica
Model	BS-320
Category	Fire Alarms
Language	English