Autronica BS-320 - 13.5 How to Enter Access Level 3; Set Password

System Menu
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 74
13.3 How to Set / Change Date and Time
The procedure below describes how to set / change date and time.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press
!
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
2
To select SYSTEM, press 4.
3
To select DATE AND TIME, press 1.
Comments:
The date will appear automatically. If the wrong
date appears, you can overwrite with the correct
date.
4
If necessary, enter the correct date
(8 digits; YYYYMMDD), then press
5
Enter the correct time (6 digits; hhmmss), then
press
twice.
SYSTEM
1 DATE AND TIME
2 INFORMATION
3 ACCESS LEVEL 3
4 PRINTER
5 CHANGE LANGUAGE
6 INITIALIZE
7 DAY/NIGHT TIMERS
19:23
SYSTEM
1 DATE AND TIME
2 INFORMATION
3 ACCESS LEVEL 3
4 PRINTER
5 CHANGE LANGUAGE
6 INITIALIZE
7 DAY/NIGHT TIMERS
19:23
SYSTEM
19:23
DATE AND TIME
Current date: 1998-11-26
Current time: 15:59
New date (YYYYMMDD) : 19981126
New time (hhmmss) :
SYSTEM
19:23
DATE AND TIME
Current date: 1998-11-26
Current time: 15:59
New date (YYYYMMDD) : 19981126
New time (hhmmss) :
SYSTEM
19:23
DATE AND TIME
Current date: 1998-11-26
Current time: 15:59
New date (YYYYMMDD) : 19981126
New time (hhmmss) :
SYSTEM
19:23
DATE AND TIME
Current date: 1998-11-26
Current time: 15:59
New date (YYYYMMDD) : 19981126
New time (hhmmss) :
SYSTEM
19:23
DATE AND TIME
Current date: 1998-11-26
Current time: 15:59
New date (YYYYMMDD) : 19981126
New time (hhmmss) : 142400
Successfully Completed
SYSTEM
19:23
DATE AND TIME
Current date: 1998-11-26
Current time: 15:59
New date (YYYYMMDD) : 19981126
New time (hhmmss) : 142400
Successfully Completed
www.ukpanels.com