Autronica BS-320 - 13.3 How to Set; Change Date and Time

Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 72
Step Actions to be taken Display Indication
5
Press
6
To execute the command, press
7
To return to the ENABLE menu immediately,
press
ENABLE
1 DETECTION ZONES
2 POINTS
3 FIRE ALARM DEVICES
4 FIRE ALARM ROUTING EQUIPMENT
5 OUTPUTS
6 FAULT WARNING ROUTING EQUIPMENT
7 IMMEDIATE OUTPUT ACTIONING
19:23
ENABLE
1 DETECTION ZONES
2 POINTS
3 FIRE ALARM DEVICES
4 FIRE ALARM ROUTING EQUIPMENT
5 OUTPUTS
6 FAULT WARNING ROUTING EQUIPMENT
7 IMMEDIATE OUTPUT ACTIONING
19:23
Comments:
If the Close button is not pressed, the ENABLE
menu will appear automatically after a short
moment.
ENABLE
19:23
OFFICES
DETECTION ZONES
Enablement time: 20:45
Execute command
ENABLE
19:23
OFFICES
DETECTION ZONES
Enablement time: 20:45
Execute command
ENABLE
19:23
OFFICES
DETECTION ZONES
Enablement time: 20:45
Successfully Completed
ENABLE
19:23
OFFICES
DETECTION ZONES
Enablement time: 20:45
Successfully Completed
www.ukpanels.com