Edit-Window - Table mode
Inc small
“ =” key
Small increment. Uses the "=" key which is labelled with the '+' key.
Dec small
“-“ key
Small decrement. Uses the "-" key
Inc large
“Shift” + “=” key
Large increment. Uses the Shift + "=" key which is labelled with the '+' key.
Dec large
“Shift” + “-“ key
Large decrement. Uses the Shift + "-" key
Enter
“Enter” key
Options for Enter box.
*1.2
Multiply the cell by 1.2
*1.2/1.3
Multiply the cell by 1.2/1.3
/1.2
Divides the cell 1.2
1.2/1.3
Place constant 1.2/1.3 result in cell
XYX+
Adds to cell XYZ
XYZ-
Subtracts XYZ from cell
• If results are outside the cell will be shown as an error. Error can be
syntax which means cannot understand what want to do or range which
means new data will fall out of range.
Insert axis
“Insert” key
Select axis that you want to insert a line & then will prompt you for the value.
Enter value will enter the value on the axis.
To Next Page
Loading...
Need help?
General