AUX DC Inverter Free Match 50HZ R32
Clock Setting: Normally display the clock set currently (display 12:00 for the first electrifying
or resetting). When press the button for 5 seconds, the time display zone will flicker, then press
【+】 and 【-】 button to adjust hour that uses 12-hour clock including “A.M.” and “P.M.” time;
press the button again to complete the setting.
Timer setting: Press the button to set TIMER ON/OFF , press the button then “ON” will
flicker on the display screen. then press【+】 and 【-】 button to adjust timing time; press the
button again to complete the setting. The “OFF” setting is the same methods.
Remark: When setting functions such as mode, temperature, fan speed, display
screen displays all presetting parameters and remains constant; after reaching presetting
time, air conditioner will automatically start as per presetting state.
After setting timing ON and OFF function, pressing button of 【Timer/Clock】can
cancel timing setting.
SLEEP button:
1. Press the button to the sleeping indicator light of indoor unit flashes on;
2. In sleeping mode, the cooling operation enables the set temperature to increase 1℃ after 1
hour and another 1℃ automatically after 1hour.
3. In sleeping mode, the heating operation enables the set temperature to drop 2℃ after 1 hour
and another 2℃ automatically after 1hour.
The air conditioner will cancel sleeping mode automatically after running in this mode for 7
hours.
4. Remark:
Press the mode or ON/OFF button, the remote controller will cancel sleeping mode.
SCREEN button: Press the button to let the LCD display working or not.
To Next Page
Loading...
