AVANT 744i - ROPS;FOPS Safety Frames and Crushing Hazards

Safety First Avant 755i 760i
16
WARNING
Stay within the space protected by
the ROPS safety frame. Always
keep seat belt on to stay on
driver's seat and to avoid getting
crushed between ground and a
loader that tips over.
DANGER
Silica dust warning. Prolonged
exposure to crystalline silic
a can
cause serious or fatal respiratory
disease. Occupational health and
safety officials recommend limiting
exposure to dust that is present at
most earth-
moving and many other
work sites. Avoid spreading of dust
where possible, keep loader cabin
clean f
rom dust, and use
respiration mask when necessary.
.
Safety frame (ROPS) and safety
canopy (FOPS)
The loader is equipped with a Rolling Over Protective
Structure (ROPS) and a Falling Object Protective
structure (FOPS). These safety structures are
important parts of operator safety, and they must be
fitted on the machine.
Safety frame (ROPS) protects the operator in case
the machine tips over. Fasten seat belt while
operating a machine with a ROPS. All cab versions
are ROPS & FOPS tested and certified.
WARNING
Crushing hazard -
Always keep
safety structures installed.
Never remove the safety
structures, modify them, or
attempt to repair.
If damaged,
contact service.
Always fasten the seat belt in or
der
to stay inside the protected area of
the safety frame. If you do not
wear seat belt you may become
crushed under the ROPS or other
structure of the loader in case the
loader tips over.