AVANT 744i - Engine Compartment and Storage Spaces on the Loader

Controls and options of the Loader Avant 755i 760i
60
.
Engine compartment and storage
spaces on the loader
Access to engine compartment
Before accessing the engine compartment, shut
down the loader and allow the loader to cool.
To open the engine cover, open the quick locks on
the engine cover and lift it aside.
For information about service and maintenance see
page 102.
Do not place any objects on the air
intake bay on top of the engine.
There is no storage space in the
engine compartment.
WARNING
Risk of fire and burns - Never
st
ore flammable liquids or
materials in the engine
compartment.
Heat from the
engine c
an warm up surfaces in
the engine compartment, keep
clear of engine and especially its
exhaust system. Some objects,
such as soft coated gloves, may
get damaged due to heat
in the
engine bay. Always check objects
that are placed in storage to avoid
burns when removing them.
WARNING
Risk of burns -
Allow loader to
cool before opening covers.
Electric and hydraulic parts may be
extremely hot after use.
The adjacent war
ning label is
located visibly below the rear
cover. Hot areas include the
hydraulic
components and hoses,
and surfaces of electric motors and
inverters.
WARNING
Risk of contact with moving
parts -
Always shut down the
engine before accessing the
engine compartment.
Engine
cooling fan, alternator belt, and belt
pulleys will move at
high speed
when engine is running. Never
open the engine cover when
engine is running.
.
Storage inside cab
There are storage areas around the driver's seat and
elsewhere in the cab. Place objects so that they will
not interfere with controls of the loader, and will not
block visibility.