Avant 755i 760i Description of the loader
35
.
Engine specifications - 755i/760i
Engine specifications
AVANT 755i/760i
Stage V
Engine make and type Kohler KDI-TCR 1903E5/26
Emissions level EU: 2016/1628 Stage V
Operating principle
4-stroke, OHV, four valves/cylinder, turbocharged, intercooler
Common rail direct injection
Number of cylinders 3
Engine RPM 1000 rpm - 2300 rpm
Fuel
Diesel: Ultra low sulphur Diesel fuel only, max S=15 ppm.
See page 36
Fuel tank capacity 40 l
Coolant 50% Water / 50% antifreeze. Freezing point <-37 °C, total volume 11,6 l
Number of cylinders 3
Starter electric
Bore x stroke 88 x 102 mm
Displacement 1861 cm³
Output (ECE R120) 42 kW / 56 hp @ 2350 rpm
Max torque 225 Nm @ 1500 rpm
Emissions, CO
2
NRSC: 771,4 g/kWh CO
2
NRTC: 788,4 g/kWh CO
2
Engine oil type
API CJ-4 / Low SAPS Euro 6, e.g. Mobil Delvac 1 LE 5W-30
See page 36
Engine oil viscosity 5W-30 (0W-30 below -25 C)
Engine oil capacity Min 5 l max 8,7 l, including oil filter
Exhaust system
Diesel oxidation catalyst (DOC), Diesel Particulate filter (DPF), exhaust gas
recirculation (EGR)
Max inclination Max intermittent 30°, Continuous operation max 25° any direction
Emission control information
The engine of the loader is certified by the manufacturer of the engine to comply with the emissions standards
listed below, and the labels on the engine. Modification of any setting or control system of the engine, fuel injection
system, exhaust or intake, can cause the engine to no longer comply with the emissions standards. Only specified
fuel and oil must be used. The engine must be serviced according to the service schedule.
Emissions level, Avant 755 / 760 Stage V
This version of Avant 755 / 760 complies with the EU 1628/2016 Stage V emission standard. For loaders that
comply with different emissions standards please contact your local Avant dealer.
To Next Page
Loading...
