Controls and options of the Loader Avant 755i 760i
70
.
Warning beacon (option)
A warning beacon is available as an option. The
warning beacon warns others about the moving
loader. The control switch for the beacon is located
in the control panel, see page 50.
example when driving
through low doorways,
the beacon can be
removed quickly by
loosening its retaining
screw and
then by
pulling the beacon out.
Place the protective
seal on the beacon
stand to prevent water
entering and damaging
the connectors.
Handle the beacon with care. The beacon is sealed
and its inner components cannot be replaced or
repaired by user.
Beacon includes high-voltage
components. Do not use or
repair damaged beacon,
replace with new one.
.
Light bar (option)
On CAB DLX
a warning light
bar can installed instead of a
warning beacon.
To Next Page
Loading...
