Setting date and time format
1. Open the audit menu.
2. Select Terminal settings.
3. Press the OK button.
4. Select Date format.
5. Press the Change softkey to select one of the following:
• DD.MM.YY
• MM.DD.YY
• YY.MM.DD
6. Select Time format.
7. Press the Change softkey to select one of the following:
• 24h
• am/pm
8. Select Date delimit..
9. Press the Change softkey to select one of the following:
• XX.XX.XX
• XX-XX-XX
• XX/XX/XX
• XX XX XX
10. Select Time delimit..
11. Press the Change softkey to select one of the following:
• HH.MM
• HH:MM
12. Press the Done softkey.
Setting up external line codes
External calls are impossible, if the telephone is locked with a local PIN.
Telephone installation
34 1408/1416 Telephones IAM Guide January 2010
To Next Page
Loading...
