• The telephone is idle in terms of the switching technology.
• All procedures are finished.
• The telephone is unlocked, and the idle display is active.
Note:
During the data transfer all events are barred on the telephone.
If the telephone detects a fault, this will be indicated to the PC. The affected data will be re-
initialized.
1. Connect the PC and the telephone via the Service Adapter:
a. Plug the provided cable into the MOD jack of the telephone.
b. Plug the USB cable into an appropriate interface of the PC.
2. Activate the data transfer in the TCM program.
Example
A detailed example how to perform a software download can be found in the chapter
Accessories > Downloading software with the Service Adapter.
Testing the telephone
You can test various functions. As long as a telephone is in test mode, it cannot receive any
calls. Each discrete test only lasts a few seconds.
1. Press the Avaya Menu button.
2. Select Settings.
3. Press the OK button.
4. Select Info/Service.
5. Press the OK button.
6. Select one of the following:
• Tone ringing ...
• Display ...
• Set contrast ...
• Set brightness ...
Local administrative options
44 1408/1416 Telephones IAM Guide January 2010
To Next Page
Loading...
