7. Enter the length of the PIN that is set up in the telephone system. This PIN has a
maximum 12 digits and applies throughout the system. Corresponding to the
entered length, the digits entered after the ELC are presented with PIN code (as ”*").
8. Press the Done softkey.
Setting loudspeaker volume
1. Press the Avaya Menu button.
2. Select Settings.
3. Press the OK button.
4. Select Display/Acoustics.
5. Press the OK button.
6. Select Set acoustics.
7. Press the OK button.
8. Select Loudspeaker.
9. Press the left/right arrow button or enter numeric characters to change the setting.
The volume of the loudspeaker should be kept as low as possible. Handsfree
operation works best under these conditions.
10. Press the Save softkey.
Setting handsfree parameter
In the settings menu (Avaya Menu > Settings > Display/Acoustics > Set handsfree)
handsfree operation can be set to normal, echo or muffled surrounding conditions. Each
of these three settings corresponds with a parameter set. All parameter sets can be modified in
the audit menu.
Note:
It is also possible to call up this menu during a handsfree connection and subsequently
change the settings. This is a good means of directly testing the settings. When testing in
this manner, speak to an opposite subscriber who is using the handset.
Telephone installation
36 1408/1416 Telephones IAM Guide January 2010
To Next Page
Loading...
