Chapter 4: Local administrative options
Audit menu
The default settings and authorizations for the user can be changed in the audit menu and
various test procedures can be implemented. The individual menu items can be found in the
chapters Audit menu overview and Barred features' list .
You will need an auditor PIN to enter the Audit menu.
Using this auditor PIN, you can even unlock a telephone locked by a user. After entering the
PIN, you must wait for the timer to count down. The telephone is then unlocked.
If the telephone was locked before, you should make sure that you lock it again after leaving
the audit menu.
In case the telephone was locked by the telephone system, you need the system terminal to
unlock it (See the appropriate service manual for more details).
Note:
Three unsuccessful attempts to unlock the telephone will result in the telephone being
blocked for 15 minutes. You can, however, unlock it at any time using the auditor password.
Saving and reloading data
You must save the phone book and the customer data prior to a change of the telephone or
to a basic initialization, and subsequently reload the data into the telephone.
The data transfer can be done via your system or locally via a PC. The first way is not matter
of this manual. If you are using a PC, the TCM program must have been installed (TCM =
Terminal Configuration Manager).
Prerequisites
The telephone is in idle state for upload or download, that is the following requirements are met:
1408/1416 Telephones IAM Guide January 2010 43
To Next Page
Loading...
