The Service Adapter is delivered with all needed connection cables: an USB connection cable
and a telephone MOD socket connection cable. Additionally you need the driver TUBS3410
for the Service Adapter. The driver is either delivered on a CD included in the delivery or you
can download it from the Avaya Support site. The Support link is provided in the delivery.
Note:
The Button Module DBM32 cannot be upgraded with the Service Adapter.
The following graphic shows the Service Adapter and how to connect the PC and the
telephone.
Downloading software with the Service Adapter
The telephone software download is done with the tool Terminal Configuration Manager TCM.
TCM is not included in the Service Adapter delivery.
1. Install the Service Adapter driver software TUBS3410 on your PC if not already
done.
Keep in mind the COM port on which the driver is installed.
2. Connect the Service Adapter with a free USB socket on your PC (USB 2.0 or 1.1)
and with the MOD socket on your Avaya 1400 telephone. See the graphic above.
On the Service Adapter the PWR LED goes on and the LINK/ACT LED is flashing.
3. Start the Terminal Configuration Manager TCM on your PC.
4. Press the button Terminal Software Download.
5. Select the COM port of your Service Adapter driver.
You can find the COM port via Arbeitsplatz > Verwaltung > Gerätemanager >
Ports (Com & LPT).
Accessories
50 1408/1416 Telephones IAM Guide January 2010
To Next Page
Loading...
