Avaya 2050 - Selecting Mac Addresses

Avaya 2050 IP Softphone Settings
91
Reset button
When you select the Reset button in the following procedures, the phone
resets immediately without any warning.
However, if you make a change to the settings and select Apply or OK,
the phone indicates that a reset needs to take place. A warning message
appears—"Avaya 2050 IP Softphone must reset for the configuration
changes to be complete. Select Yes to reset now or select No if you plan
on resetting later". You can select Yes to reset now, or No, to defer it until
later.
Selecting MAC addresses
To select a MAC address:
1. Click Auto-Create. The Hardware ID text box displays the next
address in a range of addresses.
2. Continue clicking Auto-Create to move through the range of
available addresses, until you find the one you need.
After you click through all available MAC addresses, Auto-Create
generates random hardware ID numbers. Select one of these numbers if
your Ethernet hardware address is not unique to the server.
To return the settings to their installation defaults, click Restore Defaults.
To reset the Hardware ID while the Avaya 2050 IP Softphone is running,
click Reset.
Note: The Firmware Version field displays the latest
Avaya 2050 IP Softphone firmware version reported by the server.