Avaya 3902 - Use Call Pickup

47
Incoming calls
Use Call Pickup
Call Pickup allows you to pick up a call from any telephone in the same Pickup
Group or another Pickup Group. This feature must be enabled by your network
administrator.
To answer a call in your own Call
Pickup Group:
1. Lift the handset.
2. Press the Pickup Key or enter the
Pickup Ringing Number FFC
(Meridian 1) or FAC (Meridian
SL-100).
To answer an incoming call in
another Call Pickup Group:
1. Lift the handset.
2. Press the Group Pickup Key.
3. Dial the Pickup Group number of the
telephone that is ringing.
Note 1: The network administrator assigns
the Pickup Group number.
Note 2: This feature is not applicable on
the Meridian SL-100 system.
To answer a call at a specific
extension within your Pickup Group:
1. Lift the handset.
2. Press the DN Pickup Key, or enter the
Directed Call Pickup FAC (Meridian
SL-100 only)
3. On the Meridian SL-100, dial the
extension number of the ringing
telephone.
Note: If the pickup DN is invalid, you
receive an overflow burst tone, and the
screen displays Release and try again.
Press the Goodbye Key.
Pickup
GrpPickup
DNPickup
p